PERFORMANCE OF VORTEX TURBINES IN ULTRA-LOW-HEAD HYDROELECTRIC POWER PLANTS: A NUMERICAL STUDY
Keywords:
Turbine vortex, , CFD, Cavitation, Performance, HydroelectricAbstract
The performance of vortex turbines in ultra-low-head hydropower plants is crucial for harnessing energy in irrigation channels and small rivers. Therefore, an optimal design is needed to maximize the conversion of flow energy into electrical power. This study aims to evaluate and determine the best-performing configuration of ultra-low-head vortex turbines. The method used is Computational Fluid Dynamics (CFD) simulations employing the k-ω Standard turbulence model, with variations in the number of blades (3, 5, and 7) and a fixed blade angle of 15°. The results show that the 7-blade configuration with a 15° angle provides superior performance, generating 3.90 W of power, reducing NPSH by 2%, and increasing force by 6%, with a force value of 52.65 N. The implications of these findings suggest that the 7-blade–15° configuration is a suitable design reference for optimizing ultra-low-head vortex turbines in micro-scale hydroelectric power plants, supporting the utilization of renewable energy in irrigation networks and rural areas.
References
Antono, V. & Yusreza, C. F. A. R., 2016, “Perancangan PLTMH Kapasitas 30 kW, Desa Giritirta, Kec. Pejawaran, Banjarnegara, Jawa Tengah”, Jurnal Power Plant, Vol. 4, hlm 107-13.
Biantoro, T. & Siswantoro, S., 2016, Analisa Kavitasi Yang Terjadi Pada Turbin Francis di PLTA PB Soedirman, Laporan Penelitian, Universitas Gajah Mada, Yogyakarta.
Gohil, P. P. & R.P. Saini, R. P.,2022, “Investigation into cavitation damage potentiality using pressure pulsation phenomena in a low head Francis turbine for small hydropower schemes”, Journal Ocean Engineering, Vol 263, hlm 112-230.
Gurning, F. P., Nasution, A. H., Gultom, S., Lubis, Z. & Ariani, F., 2017, “Pengaruh Bukaan Sudu Pengarah Terhadap Tingkat Kavitasi Di Sisi Masuk Pipa Isap Turbin Francis Vertikal”, Jurnal Dinamis, Vol. 5, hlm 24-36.
Huang, X. & Escaler, X., 2019, “Added MassE ectsonaFrancis Turbine Runner with Attached Blade Cavitation”, Jurnal Fluids, Vol 4, hal 107.
Li, C., Luo, X., Wu, G., Fu, Y., Feng, J. & Zhu, G., 2023, “Investigation on effect of anti-cavitation edge on performance and leakage vortex characteristics of tubular turbine for ocean power generation”, Journal Ocean Engineering, Vol 281, hlm 114-797.
Li, D., Song, Y., Lin, S., Wang, H., Qin, Y. & Wei, X., 2021, “Effect mechanism of cavitation on the hump characteristic of a pump-turbine”, Jurnal Renewable Energy, Vol 167 hlm 369-383.
Li, D., Song, Y., Lin, S., Wang, H., Qin, Y. & Wei, X., 2022, “Cavitation effects on pressure fluctuation in pump-turbine hump region”, Journal of Energy Storage, Vol 47 hlm 103-936.
Putra, R. H., Arif, R. K. & Muchlisinalahuddin., 2021, “Analisis Tingkat Kavitasi Turbin Francis di PLTA Batang Agam”, Jurnal Terapan Teknik Mesin, Vol. 2, hlm 78-87.
Rinanda, Vico. & Permatasari, Rosyida., 2018 “Optimasi Desain Turbin Air Tipe Vortex Dengan 5 Variasi Jumlah Sudu Terhadap Efisiensi”, Seminar Nasional Cendekiawan ke 4 Tahun 2018.
Safi’I, M., Sinaga, N. & Amin, M. S, 2024, “Investigasi Model Numerik Turbin Reaksi Vortex Ultra Low Head Dengan Memvariasikan Jumlah Grid Dan Metode Pemecahan Solusi”, Jurnal Device, Vol. 14, hlm 225-235.
Shahzer, M. A., Kim, S. J., Cho, Y., Choo, S. N., Nam, H. W. & Kim, J. H, 2022, “Effect of Suction Head on Inception and Development of Cavitation in a Francis Turbine Model”, Journal of Fluid Machinery, hlm 13-22.
Shahzer, M. A., Kim, S. J.,YongCho, Y. & Kim, J. H., 2022, “Suppression of vortex rope formation and pressure fluctuation using anti-swirl fins in a Francis turbine modelatpart load condition with cavitation inception point”, Jurnal Physics of Fluids.
Sitompul, Y. S., Rahmawati. & Ibrahim, H., 2021, “Analisis Pengaruh Bukaan Sudu Terhadap Tingkat Kavitasi Di Sisi Masuk Suction Pipe Turbin Francis Horizontal Unit 3 di PLTA Pakkat PT Energy Sakti Sentosa”, jurnal Konferensi Nasional Sosial dan Engineering Politeknik, hlm 216-221.
Trivedi, C., Iliev, I., Dahlhaug, O. G., Markov, Z., Engstrom, F. & Lysaker, H., 2020, “Investigation of a Francis turbine during speed variation: Inception of cavitation”, Jurnal Renewable Energy, Vol 166, hal 147-162.
Wang, C., Zhang, Y., Yuan, Z. & Ji, K, 2020, “Development and application of the entropy production diagnostic model to the cavitation flow of a pump-turbine in pump mode”, Journal Renewable Energy, Vol 154, hlm 774-785.
Zhu, D., Xiao, R. & Liu, W., 2021, “Influence of leading-edge cavitation on impeller blade axial force in the pump mode of reversible pump-turbine“, Journal Renewable Energy, Vol 163, hlm 939-949.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Clean Energy and Smart Technology
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
